Eom exampleΒΆ
This example demonstrates the
LineBroadeningEOM component. It
is a resonant EOM that is used to broaden the linewidth of a laser by modulating sidebands
onto it that are spaced by the linewidth of the optical transition.
The spacing argument sets the frequency spacing of the sidebands and is used as the
center frequency of the EOM. Together with bandwidth (or an explicit freq_limit)
it defines the RF range the EOM can be operated in. The broadening_calibration
argument converts the requested broadening width (in Hz) into the RF amplitude that is
sent to the EOM.
Experiment
from atomiq import AtomiqExperiment
from artiq.experiment import kernel, delay, ms
class EOMExample(AtomiqExperiment):
"""Atomiq Line-Broadening EOM Example
This is an example experiment to demonstrate how to operate a line-broadening EOM. The EOM is driven by an RF
source and broadens the line of a laser by modulating sidebands onto it that are spaced by the linewidth of the
optical transition.
"""
components = ["eom_broadening"]
arguments = {
"broadening_width": {"default": 5e6, "unit": "MHz"},
"broadening_spacing": {"default": 5e3, "unit": "kHz"},
"pulse_time": {"default": 1e-3, "unit": "ms", "scale": 1e-3, "precision": 2},
}
@kernel
def step(self, point):
# Add some slack
delay(3 * ms)
self.eom_broadening.on()
# Set the width and comb spacing of the broadening.
self.eom_broadening.set_broadening(
width=point.broadening_width,
spacing=self.eom_broadening.center_freq,
)
delay(point.pulse_time)
# Ramp the broadening width down to zero over the pulse time. The spacing is left untouched.
self.eom_broadening.ramp_broadening(
point.pulse_time,
width_end=0.0,
ramp_steps=20,
)
# Switch the EOM off again
self.eom_broadening.off()
Components
components = {"type": None}
# Calibration of the RF amplitude needed to achieve a given broadening width. The input
# is the width of the broadening in Hz, the output is the RF amplitude in [0..1].
components.update(
{
"cal_eom_broadening": {
"classname": "atomiq.components.basics.calibration.LinearCalibration",
"arguments": {"input_unit": "Hz", "output_unit": "amp", "a": 1e-8, "b": 0.0},
}
}
)
# RF source driving the EOM
components.update(
{
"dds_eom": {
"classname": "atomiq.components.sinara.UrukulChannel",
"arguments": {"urukul": "&urukul0", "device": "@urukul0_ch2", "ttl": "@ttl_urukul0_sw2"},
}
}
)
# The line-broadening EOM. It is a resonant EOM with a center frequency of 12 MHz and a
# bandwidth of 4 MHz, i.e. it accepts RF frequencies between 10 MHz and 14 MHz. The
# broadening calibration converts the requested broadening width into an RF amplitude.
components.update(
{
"eom_broadening": {
"classname": "atomiq.components.optoelectronics.lightmodulator.LineBroadeningEOM",
"arguments": {
"rfsource": "&dds_eom",
"switch": "&dds_eom",
"spacing": 12e6,
"bandwidth": 4e6,
"switching_delay": 20e-9,
"broadening_calibration": "&cal_eom_broadening",
},
}
}
)